GSM7352S  Version v8.0.1.2

8.0版本发布,适用于以下型号:

GSM7328S(v1和v2)、GSM7352S(v1和v2)、GSM7328FS、GSM7224v2、GSM7248v2,FSM726E,FSM726v3,FSM7226RS、FSM7250RS

增强功能(比7.x版本):

Name

Description

IP Source Guard

Protect man-in-the-middle attack

ARP Guard

Protect against ARP spoofing attack

DHCP Snooping

Protect against disguised DHCP server

ACL over VLAN

Allow ACL control be applied to entire VLAN instead on a port only

Dynamic VLAN

Allow port,s VLAN membership be determined by the RADIUS server

Guest VLAN

Allow creation of DMZ VLAN in company network

IPv6 Management

Allow the switch CPU management be part of IPv6 network

IPv6 Routing

Support routing of IPv6 packet. Only available via license.

4-to-6 Tunnel

Support tunneling of IPv6 to IPv4 traffic and vice versa

IP Multicast Routing

Support routing of IP multicast traffic for application like video streaming. Only available via license.

Dual Image

Provide backup firmware image in case the main image is corrupted during firmware upgrade

Captive Portal

Provide internet access authentication

Text-based Configuration

The switch configuration now is in text format when the configuration file is backup to the PC that it can be edited or reviewed easily

MLD Snooping

IPv6 multicast protocol snooping for forming IPv6 multicast group

RADIUS enhancements

Add backup RADIUS server, allow server redundancy. Support simultaneous transactions from the RADIUS client to multiple RADIUS servers

Denial Of Service Protection

Provide protection against common Internet Denial of Service attack

Voice VLAN

Support LLDP-MED enable IP Phone for creating special VLAN for priority treatment

IP subnet VLAN

Allow creation of VLAN based on the client device,s IP address subnet

SCP, SFTP Firmware Upgrade

Support secure file transfer for firmware upgrade

Dynamic Stack

Allow stacking be constructed using optical cable

sFlow

Support traffic flow monitoring based on network flows

Auto VoIP

Support QOS treatment of IP phones.

注意:

  1. 7.x以前的版本先升级到7.x版本,7.x以后的版本可以直接升级到8.x版本。
  2. 部分7.x的命令在8.0版本上有语法改变。
  3. 升级到8.0时,7.x版本的配置信息应该迁移,当他升级完成后,旧的配置可能会丢失。
  4. 在某些 GSM73xxS 上,可能因为闪存里有其他临时文件而因空间不足导致升级受阻,如果遇到升级失败,请与NETGEAR客户服务联系。

升级过程和注意事项:

  1. 点击以下按钮下载 firmware 文件包。

    8.4MB
     
  2. 将压缩文件解压得到 stk 格式的 firmware 文件。参考7000系列交换机7.0以上版本升级说明及注意事项进行升级。
  3. 提示:如果您使用微软的Vista操作系统,里面没有超级终端来使用串口,您可以下载一个开放的终端程序如 Tera Term (http://hp.vector.co.jp/authors/VA002416/teraterm.html )。

 
技术查询

可以输入任何问题,一个产品型号或者一个功能进行查询

客服电话

电话销售热线:
    
服务时间(法定节假日除外):
家庭产品:周一至周六 9:00-18:00
商用产品:周一至周五 9:00-18:00

客服邮箱
保修政策与保修流程