美国网件(NETGEAR) - 技术支持

GSM7352S Version 08.0.2.10

适用于以下型号：

GSM7328Sv2、GSM7352Sv2

问题修复（比 8.0.0.25 版本）：

DHCP server IP address size is increased to 2000
AX744 (CX4) adapter card shown with "Fiber" type in "show port" output incorrectly
Sometime during firmware upgrade, there might be configuration corruption
The Spanning Tree Protocol Topology Change Notication (TCN) message in the logs is not saying the port in which TCN is received.
Stack master system prompt changed when master and backup models are different
IGMP Querier does not work with routing VLAN,s
SNMP community string contains special characters not accepted in GUI. but works fine in CLI
SNMP Spanning Tree Protocol MIB object, dot1dTpFdbTable mibs, are missing
GUI page show system has wrong fan info
Error message about temperature "...sensor 235 i2c operation failed" shows up in the logging buffer
TACACS+:telnet is unable to go into previlege mode when telnet use TACACS+ as enble method
The help description of DoS (Denied of Service) command is incorrect
When downgrading from 8.x to 7.x, the switch,s MAC and serial number data would be lost
boot menu option 13 doesn,t recover password
AX744 ports need to change the MAC 10G port pre-emphasis and attenuation, otherwise there may be packet drops
Show interface switchport output missing "packet forwarded by CPU"
Switch will crash if "username" function is configured
Device sends IGMP Group Specific Query when IGMP Querier is not enabled.
Jump links are missing for "routing table" and "ip" in index page
Unable to goto the corresponding page when click site index->VLAN Routing Configuration
Online Support/User Guide/the image link on the top right of the GUI page is incorrect.
LLDP is sending out the wrong management IP address to the remote partner
The command "show ip pimdm interface stats all" doesn,t show all of interface stats
Some command pop-up menu on GUI the device view has some issues
Switch doesn,t accept the session-timeout in port based mode
Somehow 8.0 logged buffer reports event in the oldest event first
GUI: failed to show login help page.
Port Triggered Topology Change should be in u/s/p format
STP Topology change notification log message are mssing.
Maximum Number of Remote Connection Sessions should be 5 instead of 4
GUI MFDB: help information for the MFDB table is incorrect.
Failed to configure radius accounting server without the accounting server name on GUI
Crash when configure snmpv3 authentication protocal to be "md5" or "sha"
DSCP value changed when enable ip-dscp-mapping on a stacking switch
Unable to upload script from usb to nvram using copy usb://test2.scr nvram:script test2.scr
COS queue configuration command under LAG virtual inertave was lost after reloading
traffic-shape command configured under LAG virtual interface was not saved after reboot
LACP actor priority changed accordingly when system priority changed
SNMP: trap message still uses the trap community which is deleted.
Security->ACL->Advanced->IP Rules web page does not show anything regarding IP ACL rules even after configuring ACL rule
The switch is returning error message while deleting RADIUS server configuration
Port dvlan configuration page does not display custom ethertype 0x88a8 when set through the web page
User unable to login into the switch when using "enable" as a authentication method
Error message pops up when delete all static routes by GUI
DHCP command ,option 67 ascii xxx, was returning an error mesage
Support all "ip xxx" commands under LAG virtual interface

升级过程和注意事项：

点击以下按钮下载 firmware 文件包。

8.9M
将压缩文件解压得到 stk 格式的 firmware 文件。参考7000系列交换机7.0以上版本升级说明及注意事项进行升级。
提示：如果您使用微软的Vista操作系统，里面没有超级终端来使用串口，您可以下载一个开放的终端程序如 Tera Term （http://hp.vector.co.jp/authors/VA002416/teraterm.html ）。