|
FVS318G Version 4.3.3-3 |
发布日期:2015年5月22日
修复问题
- Not able to establish the vpn tunnel with iphone in IPv4/IPv6 mode.
- Fixed SSL VPN ActiveX certificate expired.
待修复问题
- [CLI]Device is accepting start IP address is larger than end IP address in IPv6 Address pool table.
- Device is not accepting mode config pool IPs for a specific range of addresses through CLI.
- Not able to change to IPv4/IPv6 dual mode through CLI.
- Unable to login to the device GUI after configuring custom portal as default.
- Device is not showing prefix length for IPv6 WAN address in router status and WAN setup page.
- Sometimes TELNET session to the device is not accessible.
- List of services of server group are not displaying in CLI show command.
- Device is not showing proper error message while performing ping and trace route when the selected local gateway WAN is down.
- Device is showing error "IP subnet conflicting with WAN1" while adding multihoming IP address when WAN ISP type is PPPoE/PPTP.
- Opened ports are getting closed when we make changes to other rules in Port Triggering page.
- Device WAN not able to connect with the Windows PPTP server.
- Not able to establish IPv6 SSL-VPN tunnel from java based browsers with java 8 update 20 version.
- Unable to run the FTP traffic from Filezilla client over SSL Port forwarding tunnel in the Windows7 64 bit host.
- Unable to establish Port forwarding tunnel from Windows7 64 bit IE9 browser.
- [SSL VPN] tunnels establishment failed for Windows 8.1 64 bit IE11 browser.
- Link detection processes are seen for WAN3 and WAN4 also but device is having only WAN1 and WAN2.
- Observed critical error when we click on trace route option, if ping though VPN tunnel is selected.
Note: Support 25 VoIP phone calls. Next release we will support 50 VoIP phone calls.
升级办法:
在升级之前,请把设备的配置信息都记录好,你可能在升级之后需要使用到这些信息。这些重要的信息包括登陆密码,安全设定,VPN 策略及 ISP 的配置信息等等。 首先从官方网站下载升级文件,一切准备就绪就可以开始升级。
- 下载 Firmware到本地计算机,下载的Firmware需放到英文目录下,如d:/FVS318Gv2,不要放在桌面或中文目录下。
- 通过浏览器登陆到管理页面。
- 在Administration > Settings Backup & Upgrade > Router Upgrade菜单中点击“浏览”按钮,选中下载的Fimware文件,并点击upload。在弹出的页面中点击“确定”FVS318Gv2开始升级。
- 升级完成后,FVS318Gv2将显示系统已成功升级,并自动重新启动
- 恢复出厂设置值,即在通电的情况下按着复位键约15秒即可。
|
|
|
|
![](images/righttop.jpg) |
技术查询 |
可以输入任何问题,一个产品型号或者一个功能进行查询
|
|
![](images/rightbottom.jpg) |
保修政策与保修流程
![](images/buttonmore05.jpg) |
|