美国网件(NETGEAR) - 技术支持

SRX5308 Version 3.0.7-45

发布日期：2011年9月14日

新特性

The SRX5308 now provides QoS features for users transmitting packets through WAN ports. Users can choose either Rate Control or Priority. Rate Control assigns guaranteed minimum and maximum bandwidth to ports. Priority assigns service priority to the ports.

已知问题和限制

In Load Balancing Mode, the WAN Connection Speed cannot be limited.
When using QoS rate control you cannot use the same target setting for inbound and outbound traffic.
Inbound bandwidth is displayed in the GUI when outbound bandwidth only is configured.
GUI validation for maximum number of firewall sessions should be proc/sys/net/ipv4/ip_conntrack_max output and is not.
On the "Edit LAN Groups" page, the ip validation javascript error message is wrong.
You are unable to delete the configured host names in port forwarding if the number of characters are more than 50.
You can add static routes even though the WAN interface is down.
If the port forwarding tunnel is established using Firefox, http traffic is blocked. A workaround is available.
A user cannot be deleted when user name contains the “+” character. The user name does not display on the edit page.
The Routing entry added for WAN-ETHERNET interface is displayed as a WAN-VIRTUAL interface.
Routes are added on Virtual and Ethernet interfaces, when connected as DHCP and PPPoE respectively.
If you change Select User Type from ,Administrator’ to ,SSL VPN User’, the DUT does not show an error message.
After an upgrade the Reboot screen does not show the DUT name.
The IGMP information is not updated in attack check help page.
PPTP idle timeout does not work when IGMP proxy is enabled.

升级办法：

点击下面的按钮下载升级文件到你的电脑上。

19 MB
通过浏览器登陆到管理界面。
点击 Administration>Settings Backup & Upgrade 管理菜单，在 Router upgrade 选项中点击“浏览”选中刚才下载的 img 升级包。
点击 Upload。
等待文件传输完毕，路由器将会重新启动，等待直到路由器的 TEST 指示灯熄灭之后，路由器的升级完成。
.通过路由器前面面板的 Facotry Default 按扭或管理界面 Administration>Settings Backup & Upgrade 的 Default 按扭恢复出厂设置值。