发布日期：2008年2月28日

新特性/增强功能/问题修复：

1. New Prosafe Control Center Device Manager (PCC-DM) web server for switch management.
   The PCC-DM is a completely new GUI changed from the old GUI in 6.x firmware. The following are highlights of the enhancements in the new GUI:
   - Complete redesign of the feature navigation and web page layouts with new top row main tabs as well as side panel navigational pane.
   - Each page is redesigned with clear and easy access to configuration and status information
   - A site index page is provided that allows user to search easily for any available features provided by the switch
   - Enhancement of ACL page to allow easier configuration for creating ACL rules
   - Enhancement of DiffServ page to allow easier configuration for creating QOS policy
   - Provide link entry for certain web page that allow user to jump to related screen directly without going thru the navigation pane
   - Added SNMPv3 configuration pages
2. New MAC-based VLAN support on GSM73xxS series that allows user to create VLAN assignment based on the client’s MAC address.
3. New user selectable link aggregation load balance algorithm for GSM73xxS series.
   Note: See new 7.1 Command Line Reference User Manual for command syntax for those new features.

已知的限制和局限性：

1. If the web session is in HTTPS mode, and HTTP mode is used to perform firmware download, then the download will fail.
   Workaround: Use TFTP to perform firmware download via HTTP session instead.
2. If the web session is in HTTPS mode, and TFTP mode is used to perform firmware download, then there may not be a download success message displayed at the end of the download.
   Workaround: Although there may not be a completion message, but the firmware is downloaded successfully. So just ignore the absent of the success message.
3. Can,t display success information after downloading configuration file thru TFTP with either Window IE 6.0 or IE 7.0
   Workaround: Problem only affects GSM73xxS models and occur rarely. This is due to the downloading of configuration file will cause the hardware be re-initialized, hence disconnecting the web session momentarily. The configuration file has being downloaded successfully, please ignore the message.

升级过程和注意事项：

注意：6.2.0.14支持之前版本的配置。如果从该版本转换到5.x版本，配置将会丢失。如果当前是5.x版本，请保存当前的配置以便转到5.x版本的时候使用。所有6.x版本之间的配置可以互用。

1. 点击以下按钮下载 firmware 文件。
   
   8.29MB
   
   
2. 7.0以上版本请参考7000系列交换机7.0以上版本升级说明及注意事项进行升级。
3. 6.2及以下版本请参考参考升级说明及注意事项进行升级。

可以输入任何问题，一个产品型号或者一个功能进行查询

客服电话

电话销售热线：      服务时间（法定节假日除外）： 家庭产品：周一至周六 9:00-18:00 商用产品：周一至周五 9:00-18:00

客服邮箱